Category Archives: WIA

Welcome home surprise!

2013-11-09 18.14.05

My wife, Amy and I got home from a week long Walt Disney World vacation.  Coming back to 50° from Florida’s 80°, sunny days was quite a shock.  I also got a very unexpected surprise when we got back to the house.  We made sure to have our mail stopped while were gone and didn’t expect any packages.  That being said, as we drove past the front of the house, Amy commented about a big FedEx package that was sitting by our front door.  Who knows how long it had been sitting there.  Once we got inside, I went out to bring in the box and noticed it was addressed to me.  I had no idea what it could be.

2013-11-09 18.14.24

I opened up the box, and out came a brand new handsaw.  A closer look at the index card taped to the box indicate that I had won the Rip cutting event at Woodworking in America and the saw was the prize!

2013-11-09 18.15.33

2013-11-09 18.15.55I can’t wait to put this saw through it’s paces.  It will definitely be making appearances in future blog posts!

Until next time. . .

Woodworking In America (Day 3)

wia

 

2013-10-20 10.47.04

Today was the final day of Woodworking In America.  It was only a half day and there were only a handful of sessions.  I attended the session offered by Don Williams on historic finishing techniques.  This session was one of the best of the conference.  Don covered the finishes, tools, and techniques used in period furniture.  I can’t wait to build some projects to put what I learned into practice.

I’ll provide some more details when I get to finishing the end table project I started earlier in the year.  The basement remodel will have to get finished first.

Until next time . . .

Woodworking In America 2013 (Day 2)

 

 

 

 

 

 

 

wia

2013-10-19 09.54.11

I wish Woodworking In America was more than two and a half days long.  Today was another great day of sessions.  The first session I sat in on was carver Mary May demonstrating how to add life to leaf carvings.  I really need to invest in a good set of carving tools and really get my feet wet.  If you are interested in learning wood carving, Mary has an online carving school you should check out.

The next session was Roy Underhill demonstrating “The Mystery Mallet” (see the photo above).

After Roy’s class, I hit the marketplace and competed in a couple of Hand Tool Olympics events, bought a couple of tools, and had some lunch.

2013-10-19 14.19.41

The whole afternoon was time well spent with Peter Follansbee as he demonstrated the process of building a 17th century joyned chest.

I could have spent all day learning from and talking with Peter and been happy.  This session alone was worth the trip to the conference.

Tomorrow is the last day of WIA.  I’ll post a summary of the day tomorrow night.

Until then . . .

Woodworking In America 2013 (Day 1)

2013-10-18 13.55.56

Today was a great day at the Woodworking In America conference in Covington, Kentucky!  I just wish there were six of me so I could attend all the sessions offered!

2013-10-18 15.34.10

My first session was blacksmith Peter Ross discussing hardening and tempering soft tools.  I’m afraid I could easily fall down the blacksmithing rabbit hole if I’m not careful.  In this session, Peter described and demonstrated how to (re)harden and temper tools.

Next, I sat in on Chris Schwarz’s session on Joinery Planes.  This was  a great refresher on using plow planes, rabbet planes, shoulder planes, and router planes.

After the Scharz’s session, I had about an hour and a half, so I hit the marketplace and spent most of my tool allowance in about 30 minutes.  Then I hit the Hand Tool Olympics.  Today’s events were crosscutting, boring a hole with a spoon-bit, and cutting tenons.

2013-10-18 14.52.02

In the afternoon, I went to see Ron Hock discuss sharpening edge tools.  This was a great session.  I may have to pick up a copy of Ron’s book The Perfect Edge, the Ultimate Guide to Sharpening for Woodworkers.

The last session of the day was with Peter Follansbee, the master joiner at Plymouth Plantation, demonstrating 17th century carving.  I am always amazed and inspired by Peter’s work.  Here are some samples he had at the conference.

2013-10-18 15.53.15 2013-10-18 15.53.11 2013-10-18 15.53.08 2013-10-18 15.53.04

This session included added pre-show entertainment courtesy of Roy Underhill from the Woodwrights Shop.  I’m glad I was at this session to get these photos.

2013-10-18 16.01.33 2013-10-18 16.02.42

Today I also had the pleasure of meeting Caleb James, a chair and plane maker whose blog I follow.  If you haven’t visited Caleb’s blog, I highly recommend it, especially if you are interested in chair or plane making.  It is chock full of great information.

Tomorrow’s sessions promise to be just as good as today’s.  I can’t wait for 9:00 tomorrow morning.  I’ll post a summary of the day tomorrow night.

Until then . . .